Global Cache: Receiving States of Sensors and System Data

<< back (AV & Custom Systems)

iRidium for AV & Custom Systems
the package of tools for setting up equipment which is not included in the standard iRidium database: all Audio/Video equipment, format converters and any other elements of automation systems.
The AV & Custom Systems driver enables sending of any commands in any format (ASCII, HEX, DEC) using any type of transport for it (TCP, UDP, HTTP, RS232). 2-way communication with AV equipment is performed with the help of ready-made modules and iRidium Script.

Capabilities

Converters from TCP to IR produced by Global Cache (iTach IP2IR, iTach WF2IR or GC-100-06, GC-100-12) enable you not only to send IR commands but also connect specialized sensors instead of device IR emitters. Sensors of power supply, video signal and dry contac allow you to receive and use information about the status of Audio/Video equipment of your installations in iRidium projects.

Sensors for connection to Global Cache 3,5 mm sockets are not included in the standard set of converters. They should be purchased separately.

Instructions

AV & Custom Systems: Receiving States of Global Cache Sensors

   Global Cache sensors can be connected to the converters with 3,5 mm sockets for working via IR.

   1 Principles of Work with Global Cache Sensors
   2 Setting up iRidium for Receiving States of Sensors

AV & Custom Systems: Receiving System Data from Global Cache

   System data can be received from any Global Cache converter regardless of its type and 
   configuration.

Downloads

Download: Base of Global Cache ready modules for iRidium projects (127 Kb)